How to Identify Mould During Home Inspection

While mould is considered to be a good natural thing, it isn’t so appreciated when you find it growing in your home. Besides its undesirable look in your home, it can cause a fair damage to your house and it can even pose a health risk to you and your family.

As one of the experienced new home inspections Werribee company, here Casey Building Consultants puts together 4 essential tips to identify mould in your home.

Consider Mould as a Problem

First of all, you need to consider mould as a problem. If you let the mould grow it will widely spread in the surface thereby weakening it. Even if you clean the affected area by simple scrubbing, it tends to come back.

If you see mould, it might be an indication that there is a moisture problem in the wall or the ceiling. So, you need to find the source of the moisture and eradicate it.

Whether It Is Mould or Dirt

In general, mould will not wipe clean as easily as dirt. If it is mould, you usually have to do some serious scrubbing to get the surface clean.

As an additional point, mould and mildew have an odour. If you are still unsure, you could test the spot with a few dabs of diluted bleach. If the spot lightens, then it is probably mould.

Possible Result of a Plumbing Leak

The presence of mould can be an indication that there might be a plumbing leak. In certain cases, this might be obvious because the mould is growing near a pipe, a waste line or near a fixture but it might not always be that evident in during DIY House Inspection Werribee.

Water can travel easily through the walls. It can descend, it can move laterally, and if it turns into vapor, it could even travel upward to cause mould problems above the leak. So just because your mould is not appearing near an obvious water source does not mean a plumbing leak is not the culprit.

If you have a plumbing leak, it needs to be found and fixed. Use this guide as a way to check some of the most common sources of plumbing leaks.

Indication of Poor Home Insulation

Warm air is naturally going to flow toward any spaces where insulation is thin or missing. When this warm air meets the cool wall, the water vapor in the air is going to condense into liquid water feeding the growth of mould in that area of the home.

If you go for a building inspection in Werribee, you can catch it early. Then you might be able to scrub the mould clean. Once clean, you could then use a humidifier to control moisture levels in the room. If this does not work, you may need to open the walls to add insulation.